Shower Upgrade 101 - Best Practices For New Unit Installation

Request Free Estimate

They are making a number of good points relating to Simple ways to Install a Shower Cubicle on Your Own overall in this post underneath.

A successful shower setup requires careful planning and also a great deal of job. In most cases, you will certainly require to do 3 sorts of jobs: mounting wall surfaces, installing the plumbing, and finishing walls.

Preparation

Firstly, you should decide on the type of shower that you wish to install. It is essential to ascertain whether the picked shower can coping with particular systems as well as can control a safe level of water via the central heating boiler. Many shower units nowadays are designed to be adaptable to various water pressures (such as stored warm water and also chilly mains).
It is additionally vital to take into consideration the water pressure and the preparation of the piping as well as drain for the shower

Different Kinds Of Shower Units

Push-on Mixer: The pipe as well as spray parts of the push-on mixer shower unit can be connected to the bathroom faucet according to your demand, and the water temperature can be readjusted by means of the taps. Push-on mixers are cheap and extremely straightforward to mount. Nevertheless, although the hose pipe connection is straightforward, it is conveniently removed. Additionally, it is inconvenient to readjust the temperature.

Bath/Shower Mixer: The hose pipe and also spray of this kind of shower are combined with a bath mixer faucet, as well as the temperature can be readjusted with the bath faucets. It is an extremely low-cost option and also no additional plumbing is involved. Nonetheless, the bath/shower mixers likewise suffer from bothersome temperature level control alternatives.

Handbook Mixer: The tube and spray of a manual mixer shower unit belong of the wall surface unit and also the hot and cold water products are linked to a single valve The temperature level as well as stress of the water are managed through either one or a range of knobs (in extra costly showers). Although temperature level control is much easier in hand-operated mixer types, they are extra costly than the previously pointed out mixers. They also need additional plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The hose as well as spray of this shower type are a part of the wall surface unit and also the hot and cold water materials are connected to a solitary shutoff right here also. It is complete with an integrated stabiliser to self-adjust the water temperature as well as to stop it from becoming also hot. One of the largest advantages of a thermostatic mixer shower type consists of convenient temperature control. Nonetheless, it is the most costly of the various mixer options.

Power Shower: A power shower is a solitary device including an effective electrical pump that is capable of changing both the water stress and temperature. This sort of shower can be fitted if there is water supply from a cold water cistern and also a warm water cylinder. A power shower makes the modification of both stress and temperature simple. On the other hand, it disagrees for water heated directly by the shower or where the water is supplied by a mix central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply and it heats up the water electrically. It is very important to keep in mind that for this shower type to be installed, the mains stress requires to be at the very least 0.7 kg/sq cm (10lb/sq in). The system enables the temperature as well as stress to be readjusted using a handle. Models with temperature stabilisers are better as they stay untouched by various other faucets in other places in operation within the household. A major disadvantage of electric showers is that the control handle just enables the alternative of heats at much less stress, or reduced temperatures at a greater pressure. This is problematic in the winter season when the spray is typically weak as well as the mains water is chillier. Nevertheless, this issue is dealt with in some designs which are offered with a winter/summer setup.

Technique

Depending upon the kind of shower you want to set up, the shower head need to either be suited order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check valve.
Before starting, it is advisable to mark the positions of the shower head and control, and also to intend the pipe-work entailed. In addition, the water drainage system to eliminate the drainage will need to be planned. Both positions of the cable course and also the shower button will likewise need to be considered if a rapid or electric shower unit is being installed.
Make use of the guideline overview offered with the shower unit to fit the shower control.Before fitting the pipelines that will provide the water to the shower system, it is very important to cut off the water supply. In order to shield the pipelines, they ought to be given a waterproof covering as well as additionally fitted with isolating valves. The pipelines can after that be buried right into the wall surface as well as plastered over to neaten the total appearance.
Fit the base tray, shower head, and fittings.
Attach the primary shower control to the pipes that will certainly be supplying the water (This may call for a female screw thread adapter).
Reconnect the water as well as test the pipelines for any type of leaks, as some might need tightening.
If you are mounting an electrical shower, remember to turn off the electrical power supply prior to making any type of electrical links. Once these links have been made (there need to be support within the instruction manual), the power supply can be switched over back on.

Changing Water Pressure to Fit Your Shower

The cold water reservoir can be raised to a greater elevation (in some cases just 150mm (6inches)) by fitting a solid wooden assistance underneath it - possibly made up of struts and blockboards. If you select this option, the primary and circulation pipes will certainly also have to be elevated to satisfy the brand-new height of the storage tank.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is picked, it must be linked into the power supply in order to operate.

Piping and also Drain

It is best to make use of 15mm diameter supply pipelines, and also make the runs to the shower as brief and straight as possible so as to maintain maximum stress and reduce warmth loss. Furthermore, by reducing the use of arm joints for pipeline corners, you can reduce the resistance in the flow of the supply of water. You can attain this by bending the pipes rather.

Most Common Errors

Going against or disregarding neighborhood code constraints.

Using pipes that are as well tiny.

Attaching copper to galvanized without utilizing a brass or dielectric fitting between both.

Not utilizing tape or pipeline compound at threaded joints.

Not leveling your fixtures when mounting them.

Not mounting an air void filling up for components.

Reducing supply stub outs too short to mount the shutoff valves onto after the ended up wall is in place.

Not appropriately straightening tubes right into installations or stop valves. (Requiring the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leakage.).

When transforming the water back on in your home, constantly run the outdoors hose valve or flush your bathrooms to bleed dust as well as air from the lines. This particles can create troubles in your sink taps and other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.
https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you really like reading up on How to Install a One-Piece Shower Unit? Place feedback directly below. We'd be glad to see your feelings about this entry. We are looking forward that you come back again later on. For those who enjoyed our post kindly remember to share it. We enjoy reading our article about How to Install a Freestand.